Stainless steel brackets for cockpit table attachment.

2 posts / 0 new
Last post
SailorJo
Offline
Joined: 3/21/09
Posts: 20
Stainless steel brackets for cockpit table attachment.

We have recently upgraded the angleguard on our Mk 1 C36 for a Navpod. The outer diameter of the new tubing is 1 1/4", so we need larger brackets to attach the table back onto the angleguard. Does anyone know where we can get these brackets?

Owner of a Mk 1 C36 Hull # 379 commissioned December 1984.
Fin keel, standard rigging.
Boat is based in Nanaimo, B.C., Canada, where you will find one of the finest cruising areas in the world.

Chachere's picture
Chachere
Offline
Joined: 10/27/10
Posts: 826

Did the same mod last year on our Mk1, and had the same question.
After hunting around (without much diligence, I'll admit) for the larger brackets, I found I was able to just re-use the old ones by bending them a little. They don't quite meet up with the wooden piece on the table, but with some longer screws and some washers for spacers I was able to reattach them.

Matthew Chachère
s/v ¡Que Chévere!
(Formerly 1985 C36 MKI #466 tall rig fin keel M25)
2006 Catalina Morgan 440 #30.
Homeported in eastern Long Island, NY

Log in or register to post comments