Clutch/shift cable bent

2 posts / 0 new
Last post
jfm011
Offline
Joined: 7/17/09
Posts: 1
Clutch/shift cable bent

I need to replace the cable running from the Pedestal to the engine. I left the boat without noting the cable serial number. Does anyone know which cable I have to buy? Any help much appreicated! The boat is in a rural location, once I get there, I need to already have the cable. Hate to drive down there, just get the cable serial number!!

Thanks,

John

LCBrandt's picture
LCBrandt
Offline
Joined: 6/26/07
Posts: 1282

John, welcome to the Forum.

Because we have nearly two hundred Catalina 36 owners participating in this Forum, it is quite likely that someone here has replaced their shift cable in the last year or two and may still have their sales slip within reach to be able to extract the cable part number you seek. If not, they can at least offer advice on whom to contact to obtain one in an expeditious fashion.

I will tell you, though, that their motivation to go to this effort on your behalf, or to offer other advice in the spirit of being helpful, depends to a great deal on you. We're much more inclined to help someone if we can connect with them personally...that's only human. Obviously, in an electronic forum we can't meet you and shake hands, but a little more information can help all to get to know you 'virtually.' So if you provide additional information about yourself and your boat, to let us know whom we are assisting, it would likely help your situation.

Please share with us your name, your boat name and [especially] hull number, and tell us where you're based. In fact, if you click on "User CP" in the upper left corner of this page you can easily set up a signature that automatically posts this information, as you see my signature immediately below.

Welcome aboard.

Larry Brandt
S/V High Flight #2109
Pacific Northwest, PDX-based
2002 C-36 mkII SR/FK M35B
 

Log in or register to post comments