I need a little help with some measurments.

3 posts / 0 new
Last post
William Matley's picture
William Matley
Offline
Joined: 1/15/08
Posts: 167
I need a little help with some measurments.

If someone with access to their boat could pass along a couple measurements, I would be very thankfull.

My boat is a 10 hour round trip away and I got a sailrite front hatch canopy kit for Christmas.

The kit instructions asks for the distance from the front of the mast to the front edge of the "V" Berth hatch.
The width of the boat at the front of the mast and at the width of the boat at the front edge of the "V" Berth hatch.
 
"Thank You" in advance!

 

Bill Matley
Duncan Bay Boat Club
Cheboygan, Michigan
Lakes Huron, Michigan,
Canadian North Channel
"Spirit of Aloha" Hull #1252

Catboat Willy's picture
Catboat Willy
Offline
Joined: 12/22/14
Posts: 387

Bill;
 I'll be at the boat tomorrow am and take the measurments for ya.
 Bill

Bill Dolan 1990 Catalina C-36 MKI - Hull #1041  'Williwaw'
Std. Rig, Walk Through, Wing Keel
M35, Oberdorfer Conversion,
Home Waters; Charlotte  Harbor & The Gulf Islands of Florida
'You are never out of work if you own a boat'

 

Catboat Willy's picture
Catboat Willy
Offline
Joined: 12/22/14
Posts: 387

Bill;
 Here are the measurements from my December 1990 Catalina Mk I;

From the front of the mast to the front edge of the 'V' berth hatch;  64" inches.

The width of the boat at the front edge of the mast;  121" inches.

The width of the boat at the front edge of the 'V' berth hatch;   88" inches.
Hope that helps..Happy New Year.
Bill

Bill Dolan 1990 Catalina C-36 MKI - Hull #1041  'Williwaw'
Std. Rig, Walk Through, Wing Keel
M35, Oberdorfer Conversion,
Home Waters; Charlotte  Harbor & The Gulf Islands of Florida
'You are never out of work if you own a boat'

 

Log in or register to post comments